◆ JPEC-S(Standards)

• • • 1．

      Safety Inspection Standard (Compressed Hydrogen Fuelling Stations) (*1) / Subcommittee in Charge: Safety Inspection Standards Subcommittee

      JPEC-S 0001 (2015)

      This standard is a draft of KHK/JPEC S 0850-9 (*2), a joint standard of the High Pressure Gas Safety Institute of Japan (KHK) and JPEC.

  • • 2．

      Periodic Self-Inspection Guideline (Compressed Hydrogen Fuelling Stations) / Subcommittee in Charge: Safety Inspection Standards Subcommittee

      JPEC-S 0002 (2015)

      This standard is a draft of KHK/JPEC S 1850-9 (*2), a joint standard of the High Pressure Gas Safety Institute of Japan (KHK) and JPEC.

      (*1) Applicable only to Compressed Hydrogen Fuelling Stations with a maximum operating pressure of 40 MPa or lower.
      (*2) For details of these standards, please refer to the KHK Standards section of the KHK website.

  • • 3．

      Technical Standards for Compressed Hydrogen Fuelling (Compressed Hydrogen Fuelling Stations) / Subcommittee in Charge: Fuelling-Related Standards Subcommittee

      JPEC-S 0003-3(2025) (*3)

      JPEC-S 0003-2(2025) (*3)

      JPEC-S 0003 (2023) (*4)

      JPEC-S 0003 (2021) (*4)

      JPEC-S 0003 (2021) Comparison Table of Old and New Versions (*4)

      JPEC-S 0003 (2016) (*4)

      JPEC-S 0003 (2014) (*4)

      (*3) Freely available for use
      (*4) These standards include materials reproduced with permission from SAE International (USA). These permission conditions include terms regarding use within Japan and management by the recipient. In principle, use outside of Japan is prohibited, and in such cases, disclosure will not be made.

  • • 4．

      Explosion-Proof Standard for Dispensers / Subcommittee in Charge: Explosion-Proof Standards Subcommittee

      JPEC-S 0004 (2025)

  • • 5．

      Technical Standard for Cylinders Used on Compressed Hydrogen Transport Vehicles / Subcommittee in Charge: Hydrogen Trailer Cylinder and Accessories Technical Standards Subcommittee

      JPEC-S 0005 (2025)

  • • 6．

      Technical Standard for Accessories Used on Compressed Hydrogen Transport Vehicles / Subcommittee in Charge: Hydrogen Trailer Cylinder and Accessories Technical Standards Subcommittee

      JPEC-S 0006 (2025)

  • • 7．

      Safety Standard for Compressed Hydrogen Fuelling Stations / Subcommittee in Charge: Hydrogen Station Safety Standards Subcommittee

      JPEC-S 0007 (2017)

  • • 8．

      Technical Standard for Alternative Measures Regarding Safety Distance Regulations for Compressed Hydrogen Fuelling Stations and Mobile Compressed Hydrogen Fuelling Stations / Subcommittee in Charge: Separation Distance Regulation Alternative Measures Subcommittee

      JPEC-S 0008 (2025)

  • • 9．

      Technical Standard for Cylinder Securing Methods on Compressed Hydrogen Transport Vehicles / Subcommittee in Charge: Compressed Hydrogen Transport Vehicle Cylinder Securing Methods Subcommittee

      JPEC-S 0009 (2018)

      JPEC-S 0009 (2018) Supplementary Materials

  • • 10．

      Technical Standard for Hydrogen Fuelling Stations Using Organic Hydrides / Subcommittee in Charge: Subcommittee on Technical Standards for Hydrogen Fuelling Stations Using Organic Hydrides

      JPEC-S 0010 (2020)

  • • 11．

      Safety Standard for Remote-Monitored Self-Service Hydrogen Fuelling Stations / Subcommittee in Charge: Subcommittee on Remote-Monitored Stations

      JPEC-S 0011 (2023)

  • 12．

    Evaluation Criteria for Effective Heat Capacity Measurement of Compressed Hydrogen Fuelling Stations (Piping, etc.) / Subcommittee in Charge: Fuelling-Related Standards Subcommittee

    JPEC-S 0012 (2023)

◆ JPEC-TD(Technical Documents, Guidelines, and Guidance Documents)

• • • 1．

      Guideline for Compressed Hydrogen Fuelling Stations / Subcommittee in Charge: Subcommittee on Safety Technical Standards for Hydrogen Fuelling Stations

      JPEC-TD 0001 (2017)

  • • 2．

      Guideline for Hydrogen Trailers / Subcommittee in Charge: Hydrogen Trailer Safety Technical Standards Subcommittee

      JPEC-TD 0002 (2017)

  • • 3．

      Technical Document on Low-Alloy Steel Equipment for Compressed Hydrogen Service (Accumulators and Compressors) Used at Hydrogen Fuelling Stations / Subcommittee in Charge: Low-Alloy Steel Technical Document Subcommittee

      JPEC-TD 0003 (2020)

  • • 4．

      Guideline for Self-Service Hydrogen Fuelling Stations / Subcommittee in Charge: Self-Service Hydrogen Station Subcommittee

      JPEC-TD 0004 (2023)

  • • 5．

      Guideline for Accident Prevention Regulations for Compressed Hydrogen Fuelling Stations and Similar Facilities with Concurrent Safety Supervisors / Subcommittee in Charge : Subcommittee on Remote-Monitored Stations

      JPEC-TD 0005 (2021)

  • • 6．

      Guideline for Safety Education Programs at Compressed Hydrogen Fuelling Stations Managed Concurrently by a Safety Supervisor / Subcommittee in Charge: Subcommittee on Remote-Monitored Stations

      JPEC-TD 0006 (2021)

  • • 7．

      Guideline for Compressed Hydrogen Fuelling Stations Managed Concurrently by a Safety Supervisor / Subcommittee in Charge: Subcommittee on Remote-Monitored Stations

      JPEC-TD 0007 (2020)

  • • 8．

      Technical Document on Carbon Fiber Reinforced Steel Pressure Vessels Used at Compressed Hydrogen Fuelling Stations / Subcommittee in Charge: Type-2 Composite Pressure Vessel Accumulator Technical Document Study Subcommittee

      JPEC-TD 0008 (2020)

  • • 9．

      Guidance for Accident Prevention Regulations at Remote-Monitored Self-Service Hydrogen Fuelling Stations / Subcommittee in Charge: Subcommittee on Remote-Monitored Stations

      JPEC-TD 0009 (2023)

  • • 10．

      Guidance for Safety Education Programs at Remote-Monitored Self-Service Hydrogen Fuelling Stations / Subcommittee in Charge: Subcommittee on Remote-Monitored Stations

      JPEC-TD 0010 (2021)

  • • 11．

      Guideline for Remote-Monitored Self-Service Hydrogen Fuelling Stations / Subcommittee in Charge: Subcommittee on Remote-Monitored Stations

      JPEC-TD 0011 (2023)

  • 12．

    Guideline for Determining Barrier Heights Based on Adjacent Site Conditions (for Preliminary Assessment Against Detailed Technical Criteria for Compressed Hydrogen Fuelling Stations) / Subcommittee in Charge: Barrier Evaluation Subcommittee

    JPEC-TD 0012 (2023)

  • 13．

    Guideline for Accident Prevention Regulations for Compressed Hydrogen Fuelling Stations Equipped with hydrogen shipping facilities

    JPEC-TD 0013 (2026)

  • 14．

    Guideline for Safety Education Programs at Compressed Hydrogen Fuelling Stations Equipped with hydrogen shipping facilities

    JPEC-TD 0014 (2026)

  • 15．

    Guideline for Compressed Hydrogen Fuelling Stations Equipped with hydrogen shipping facilities

    JPEC-TD 0015 (2026)